Please browse our selection here.
Home > Products > Display
Sort byShowper page
    2.4 inch TFT LCD Display Module for Arduino
    2.4" diagonal LCD TFT display Specification
    1. 4White-LED backlight
    2.Colorful, 18-bit 262,000 different shades
    3. 4-wire resistive touchscreen
    4. 8 bit digital interface, plus 4 control lines
    5. Uses digital pins 5-13 and analog 0-3. 
    6. 5V compatible, use with 3.3V or 5V logic 
    more info
    LCD 20x4 Green Backlight

    lcd 20x4

    Green Backlight

    more info
    LCD 16x2 Blue Backlight for Arduino/Raspberry

    lcd 16x2

    blue backlight

    more info
    1bit Common Cathode Digital Tube 0.56" 0.56in. Red LED Digit 7 Segment

    1 x  1bit Common Cathode Digital Tube 0.56" 0.56in. Red LED Digit 7 Segment

    Stock available
    Add To Cartmore info
    LCD Module 16x2 (Green Backlight) for Arduino
    • Built-in Industry Standard HD44780 Equivalent LCD Controller
    • Commonly Used In: Copiers, Fax Machines, Laser Printers, Industrial Test Equipment, Networking Equipment Such As Routers And Storage Devices
    • LCM Type: Characters
    • Can Display 2-lines X 16-characters
    • Operate With 5V DC
    • Size: 80mm x 36mm x 10mm
    • Viewing Area Size: 64.5mm x 15mm


    Stock available
    Add To Cartmore info
    1602 LCD keypad Shield for Arduino

    LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider.


    Stock available
    Add To Cartmore info
    7 Segment Display



    Stock available
    Add To Cartmore info
    LCD Nokia Display 5110 Character - Arduino Compatible

    The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for cell phone screen. This one is mounted on an easy to solder PCB.

    It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns. All necessary functions for the display are provided in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface.

    Stock available
    Add To Cartmore info